Introduzione

If the LCD screen is not working, it may be a problem with the video card.

Parti

Nessuna parte richiesta.

Remove the battery from the bottom of the laptop.
  • Remove the battery from the bottom of the laptop.

  • Please click on the following link for further instruction on how to remove the battery. Dell Inspiron 9100 Battery Replacement

  • It is important to remove the battery so that you will not be electrocuted while working with the computer's hardware.

Aggiungi Commento

Insert a spludger into the notch at the far left side of the top blue panel and pry hinge cover off. Note: You may need to pry the other side off by inserting the spludger between the hinge and the top cover. Be careful of wire attached to underside of the hinge cover.
  • Insert a spludger into the notch at the far left side of the top blue panel and pry hinge cover off.

  • Note: You may need to pry the other side off by inserting the spludger between the hinge and the top cover.

  • Be careful of wire attached to underside of the hinge cover.

Aggiungi Commento

Pull the small black tab on the right hand side of the laptop.
  • Pull the small black tab on the right hand side of the laptop.

  • The hinge cover has now been removed.

Aggiungi Commento

Remove the screws at the top of the keyboard as indicated indicated. Do not just lift up, there is a tab underneath the keyboard that is still connected to the mother board. You will need to pull out the white tab underneath the keyboard upwards until it pops out of its socket.
  • Remove the screws at the top of the keyboard as indicated indicated.

  • Do not just lift up, there is a tab underneath the keyboard that is still connected to the mother board.

  • You will need to pull out the white tab underneath the keyboard upwards until it pops out of its socket.

  • The keyboard should be easily removable at this point.

Aggiungi Commento

After removing the keyboard, locate and remove the labeled screws. Gently lift the Video Card unit for replacing. Gently lift the Video Card unit for replacing.
  • After removing the keyboard, locate and remove the labeled screws.

  • Gently lift the Video Card unit for replacing.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Brian Murphy

Membro da: 13/04/2011

347 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 18-22, Garner Spring 2011 Membro di Cal Poly, Team 18-22, Garner Spring 2011

CPSU-GARNER-S11S18G22

4 Membri

15 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 15

Tutti i Tempi: 6,442