Introduzione

A dirty or broken fan may create overheating and performance issues. Accessing the fan requires some disassembly and time.

To prevent injury, make sure the laptop is unplugged before removing the battery.
  • To prevent injury, make sure the laptop is unplugged before removing the battery.

  • Flip the laptop over, bottom-side up.

Aggiungi Commento

Push the switch next to the battery.
  • Push the switch next to the battery.

  • At the same time, lift the battery away from the laptop.

Aggiungi Commento

Place the laptop on flat surface. Carefully open the laptop at far as it will go so that the back of screen is touching the flat surface. Carefully take a spudger and separate part of the cover at the red circle.
  • Place the laptop on flat surface.

  • Carefully open the laptop at far as it will go so that the back of screen is touching the flat surface.

  • Carefully take a spudger and separate part of the cover at the red circle.

Aggiungi Commento

Remove two 4 mm Philips #00 screws. Remove two 4 mm Philips #00 screws.
  • Remove two 4 mm Philips #00 screws.

Aggiungi Commento

Gently lift the keyboard away from the laptop without harming the cord that is located at the bottom of the keyboard.
  • Gently lift the keyboard away from the laptop without harming the cord that is located at the bottom of the keyboard.

Aggiungi Commento

Gently pull the blue tab up until it comes away from computer. Gently pull the blue tab up until it comes away from computer. Gently pull the blue tab up until it comes away from computer.
  • Gently pull the blue tab up until it comes away from computer.

Aggiungi Commento

Unscrew the 4 mm Phillips #00 screw.
  • Unscrew the 4 mm Phillips #00 screw.

  • The screw will remain attached to the cord when fully removed.

Aggiungi Commento

Gently pull the blue tab to separate the screen connection from the laptop. Gently pull and disconnect the white and black cords from the power source.
  • Gently pull the blue tab to separate the screen connection from the laptop.

  • Gently pull and disconnect the white and black cords from the power source.

Aggiungi Commento

Remove four 4mm #00 Philips screws from the screen hinges. Lift the screen away from the laptop.
  • Remove four 4mm #00 Philips screws from the screen hinges.

  • Lift the screen away from the laptop.

Aggiungi Commento

Remove two 4 mm Philips #00 screws that connect top of laptop to base.. Remove two 4 mm Philips #00 screws that connect top of laptop to base..
  • Remove two 4 mm Philips #00 screws that connect top of laptop to base..

Aggiungi Commento

Flip laptop the over and remove thirteen 6mm Philips #00 screws.
  • Flip laptop the over and remove thirteen 6mm Philips #00 screws.

Aggiungi Commento

Insert the plastic opening tool in between the back and front plates of the laptop Insert the plastic opening tool in between the back and front plates of the laptop
  • Insert the plastic opening tool in between the back and front plates of the laptop

Aggiungi Commento

Remove two 4 mm Philips #00 screws.
  • Remove two 4 mm Philips #00 screws.

Aggiungi Commento

Remove the fan power cord
  • Remove the fan power cord

Aggiungi Commento

Using your hand, lift the fan from the laptop. Using your hand, lift the fan from the laptop.
  • Using your hand, lift the fan from the laptop.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Jacob DeWar

Membro da: 23/09/2014

494 Reputazione

3 Guide realizzate

Team

USF Tampa, Team 11-1, Blackwell Fall 2014 Membro di USF Tampa, Team 11-1, Blackwell Fall 2014

USFT-BLACKWELL-F14S11G1

5 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 8

Ultimi 30 Giorni: 24

Tutti i Tempi: 1,206