Parti

Nessuna parte richiesta.

Flip to the back side of the laptop
  • Flip to the back side of the laptop

Aggiungi Commento

Loosen one screw.
  • Loosen one screw.

  • This screw is attached to the panel and cannot be removed.

Aggiungi Commento

Spread out pins on the opposite sides. The chip will spring up at an angle. Place new chip in at a 30 degree angle. Push inward until pins can't be seen.
  • Spread out pins on the opposite sides. The chip will spring up at an angle.

  • Place new chip in at a 30 degree angle.

  • Push inward until pins can't be seen.

  • Push RAM down, so it lays flat.

  • Improperly replacing the RAM will cause it to short-circuit.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

May Chauvin

Membro da: 14/04/2011

186 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 12-34, Maness Spring 2011 Membro di Cal Poly, Team 12-34, Maness Spring 2011

CPSU-MANESS-S11S12G34

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 16

Tutti i Tempi: 3,483