Introduzione

You would need to be removing the keyboard to access the heatsink and fan. If you need to, add a new layer of Arctic Silver Thermal Paste.

Parti

Nessuna parte richiesta.

Remove battery
  • Remove battery

  • Open screen so that it lies flat.

Aggiungi Commento

Starting from the right side of the hinge cover,  use the flat end of the spudger to pry up the hinge cover and gently remove it. Starting from the right side of the hinge cover,  use the flat end of the spudger to pry up the hinge cover and gently remove it.
  • Starting from the right side of the hinge cover, use the flat end of the spudger to pry up the hinge cover and gently remove it.

Aggiungi Commento

Remove the four M2 x 3-mm screws holding in the keyboard. Remove the four M2 x 3-mm screws holding in the keyboard.
  • Remove the four M2 x 3-mm screws holding in the keyboard.

Aggiungi Commento

Lift keyboard and detach the interface connector.
  • Lift keyboard and detach the interface connector.

  • Take extra care when removing and handling the keyboard. The key caps on the keyboard are fragile, easily dislocate and would be time-consuming to replace.

Aggiungi Commento

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Detach screen connector Detach screen connector
  • Detach screen connector

Aggiungi Commento

Remove two screws (5.8mm) located behind the screen. Remove two screws (5.8mm) located behind the screen.
  • Remove two screws (5.8mm) located behind the screen.

Aggiungi Commento

Remove one screw (8.6 mm) on metal plating. Remove the metal plating
  • Remove one screw (8.6 mm) on metal plating.

  • Remove the metal plating

Aggiungi Commento

Loosen four screws. These screws are attached to the heat sink and cannot be completely removed.
  • Loosen four screws.

  • These screws are attached to the heat sink and cannot be completely removed.

Aggiungi Commento

Disconnect the wire connecting the heatsink to the motherboard. Disconnect the wire connecting the heatsink to the motherboard.
  • Disconnect the wire connecting the heatsink to the motherboard.

Aggiungi Commento

Slide the heatsink away from the screen and lift.
  • Slide the heatsink away from the screen and lift.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

May Chauvin

Membro da: 14/04/2011

186 Reputazione

6 Guide realizzate

Team

Cal Poly, Team 12-34, Maness Spring 2011 Membro di Cal Poly, Team 12-34, Maness Spring 2011

CPSU-MANESS-S11S12G34

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 12

Tutti i Tempi: 2,832