We are removing the battery to avoid the possibility of an electrical discharge when working with this system. Flip the laptop over. Slide the latches toward the outside of the laptop to unlock the battery.
  • We are removing the battery to avoid the possibility of an electrical discharge when working with this system.

  • Flip the laptop over.

  • Slide the latches toward the outside of the laptop to unlock the battery.

  • Lift the battery out of the laptop.

Aggiungi Commento

Loosen the two screws attaching the access door to the laptop body. Using a spudger, pry open the access door from the laptop. Using your fingers, open and remove the access door from the laptop, exposing the memory cards underneath.
  • Loosen the two screws attaching the access door to the laptop body.

  • Using a spudger, pry open the access door from the laptop.

  • Using your fingers, open and remove the access door from the laptop, exposing the memory cards underneath.

Aggiungi Commento

Locate the two hard drive screws, located on the left-hand side of the hard drive casing. Loosen and remove these screws using a phillips head screw driver PH0. Push the hard drive to the left, and then lift out of the laptop casing to remove from laptop.
  • Locate the two hard drive screws, located on the left-hand side of the hard drive casing.

  • Loosen and remove these screws using a phillips head screw driver PH0.

  • Push the hard drive to the left, and then lift out of the laptop casing to remove from laptop.

Aggiungi Commento

Identify the Hard Drive caddy screws, one on each side of the hard drive casing. Remove these screws using a phillips head PH0 screwdriver. Now, with a new hard drive, attach the caddy/casing using the same screws removed from the old hard drive.
  • Identify the Hard Drive caddy screws, one on each side of the hard drive casing.

  • Remove these screws using a phillips head PH0 screwdriver.

  • Now, with a new hard drive, attach the caddy/casing using the same screws removed from the old hard drive.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 17 persone hanno completato questa guida.

Andrew Dippre

Membro da: 13/10/2014

2.284 Reputazione

7 Guide realizzate

Team

Clemson, Team 3-1, Benson Fall 2014 Membro di Clemson, Team 3-1, Benson Fall 2014

CLEM-BENSON-F14S3G1

4 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 7

Ultimi 7 Giorni: 69

Ultimi 30 Giorni: 340

Tutti i Tempi: 26,344