Aggiusta la tua roba Comunità Store

Conair Infiniti Pro Model 259NP Heat Shield Replacement

Introduzione

If your hair dryer's nozzle is overheating, this guide will show you how to replace the heat shield.

Cosa ti serve

  1. Conair Infiniti Pro Model 259NP Heat Shield Replacement, Back Panel: passo 1, immagine 1 di 1

    • Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.

    • Hold the hair dryer by the handle so that the back panel faces up.

    Traduci

  2. Conair Infiniti Pro Model 259NP Heat Shield Replacement: passo 2, immagine 1 di 2 Conair Infiniti Pro Model 259NP Heat Shield Replacement: passo 2, immagine 2 di 2

    • Remove the two 15.875 mm Phillips #2 screws from the back panel.

    Traduci

  3. Conair Infiniti Pro Model 259NP Heat Shield Replacement: passo 3, immagine 1 di 3 Conair Infiniti Pro Model 259NP Heat Shield Replacement: passo 3, immagine 2 di 3 Conair Infiniti Pro Model 259NP Heat Shield Replacement: passo 3, immagine 3 di 3

    • Starting from where the cord attaches to the handle, pull apart the two plastic panels.

    • Continue separating the back panel, working along the seam.

    • With moderate force, completely remove the back panel from the hair dryer.

    Traduci

  5. Conair Infiniti Pro Model 259NP Heat Shield Replacement, Fan Motor Assembly: passo 4, immagine 1 di 2 Conair Infiniti Pro Model 259NP Heat Shield Replacement, Fan Motor Assembly: passo 4, immagine 2 di 2

    • Hold the hair dryer by the nozzle so that the handle points to the left.

    • Remove the two 1-inch Phillips #2 screws from the back of the fan motor.

    Traduci

  6. Conair Infiniti Pro Model 259NP Heat Shield Replacement: passo 5, immagine 1 di 3 Conair Infiniti Pro Model 259NP Heat Shield Replacement: passo 5, immagine 2 di 3 Conair Infiniti Pro Model 259NP Heat Shield Replacement: passo 5, immagine 3 di 3

    • Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns.

    • Pull on the back of the fan motor to gently lift the motor out of the hair dryer.

    • Lift the attached electrical wiring and heat shield completely out of the hair dryer.

    Traduci

  7. Conair Infiniti Pro Model 259NP Heat Shield Replacement, Heat Shield: passo 6, immagine 1 di 3 Conair Infiniti Pro Model 259NP Heat Shield Replacement, Heat Shield: passo 6, immagine 2 di 3 Conair Infiniti Pro Model 259NP Heat Shield Replacement, Heat Shield: passo 6, immagine 3 di 3

    • If you recently used the hair dryer, the heating element may still be hot! Do not attempt this guide, you may severely burn yourself.

    • Hold the heating element with the wider end facing upward.

    • Gently pull the heating element out of the heat shield.

    Traduci

  8. Conair Infiniti Pro Model 259NP Heat Shield Replacement: passo 7, immagine 1 di 1

    • Gently pull the heat shield out of its sheath.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 4 altri collaboratori

Timothy Lo

Membro da: 04/22/14

1.172 Reputazione

7 Guide realizzate

Distintivi: 14

+11 altri distintivi

Team

Cal Poly, Team 10-58, Amido Spring 2014 Membro di Cal Poly, Team 10-58, Amido Spring 2014

CPSU-AMIDO-S14S10G58

4 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 8

Tutti i Tempi: 1,641