Introduzione

If your hair dryer's fan grill is damaged or dirty, this guide will show you how to replace it.

Parti

Nessuna parte richiesta.

Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.
  • Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.

  • Hold the hair dryer by the handle so that the back panel faces up.

Aggiungi Commento

Remove the two 15.875 mm Phillips #2 screws from the back panel. Remove the two 15.875 mm Phillips #2 screws from the back panel.
  • Remove the two 15.875 mm Phillips #2 screws from the back panel.

Aggiungi Commento

Starting from where the cord attaches to the handle, pull apart the two plastic panels. Continue separating the back panel, working along the seam. With moderate force, completely remove the back panel from the hair dryer.
  • Starting from where the cord attaches to the handle, pull apart the two plastic panels.

  • Continue separating the back panel, working along the seam.

  • With moderate force, completely remove the back panel from the hair dryer.

Aggiungi Commento

Hold the hair dryer by the nozzle so that the handle points to the left. Remove the two 1-inch Phillips #2 screws from the back of the fan motor.
  • Hold the hair dryer by the nozzle so that the handle points to the left.

  • Remove the two 1-inch Phillips #2 screws from the back of the fan motor.

Aggiungi Commento

Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns. Pull on the back of the fan motor to gently lift the motor out of the hair dryer. Lift the attached electrical wiring and heat shield completely out of the hair dryer.
  • Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns.

  • Pull on the back of the fan motor to gently lift the motor out of the hair dryer.

  • Lift the attached electrical wiring and heat shield completely out of the hair dryer.

Aggiungi Commento

Hold the front panel of the hair dryer by the nozzle facing upward.
  • Hold the front panel of the hair dryer by the nozzle facing upward.

Aggiungi Commento

Using your index finger push the fan grill down with moderate force. Using your index finger push the fan grill down with moderate force.
  • Using your index finger push the fan grill down with moderate force.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Timothy Lo

Membro da: 22/04/2014

863 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 10-58, Amido Spring 2014 Membro di Cal Poly, Team 10-58, Amido Spring 2014

CPSU-AMIDO-S14S10G58

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 20

Tutti i Tempi: 477