Introduzione

You will need to assemble the proper tools shown in the first step of this guide before you continue forward.

This guide is meant to assist the reader with the proper steps to remove and replace the touchpad of the Compaq Evo N1000v device.

Parti

Nessuna parte richiesta.

Remove the 6 screws as shown in the photo.
  • Remove the 6 screws as shown in the photo.

Aggiungi Commento

Push the front of the laptop upwards as the photo shows.
  • Push the front of the laptop upwards as the photo shows.

Aggiungi Commento

Rest the front end piece on the keyboard area.
  • Rest the front end piece on the keyboard area.

Aggiungi Commento

Unscrew the 4 screws as shown in the photo.
  • Unscrew the 4 screws as shown in the photo.

Aggiungi Commento

Unplug the cable as shown in the photo.
  • Unplug the cable as shown in the photo.

Aggiungi Commento

Unlock the second cable shown in the photo by using the pointed tweezers to move the lock upward on both sides of the cable.
  • Unlock the second cable shown in the photo by using the pointed tweezers to move the lock upward on both sides of the cable.

Aggiungi Commento

Unplug the cable you have just unlocked.
  • Unplug the cable you have just unlocked.

Aggiungi Commento

Remove the gray, metal case surrounding the touchpad.
  • Remove the gray, metal case surrounding the touchpad.

Aggiungi Commento

Remove the touchpad.
  • Remove the touchpad.

  • Repeat these steps in reverse order to install the new touchpad.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 183