Introduzione

Whether your knobs are broken or you want to put a decorative sticker on your front panel, sometimes you need to get the knobs off of your radio. This guide will instruct you on how to use plastic opening tools to safely remove the knobs.

Parti

Nessuna parte richiesta.

Turn the power switch, the leftmost knob, counterclockwise to off. Turn the power switch, the leftmost knob, counterclockwise to off.
  • Turn the power switch, the leftmost knob, counterclockwise to off.

Aggiungi Commento

Turn the device around and firmly pull the power cable plug to remove it from the radio. Turn the device around and firmly pull the power cable plug to remove it from the radio.
  • Turn the device around and firmly pull the power cable plug to remove it from the radio.

Aggiungi Commento

Unscrew the cap counterclockwise on the microphone plug to disconnect the cable. Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.
  • Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.

Aggiungi Commento

Gently unplug the microphone plug.
  • Gently unplug the microphone plug.

Aggiungi Commento

Gently turn the middle four knobs counter-clockwise until they no longer move.
  • Gently turn the middle four knobs counter-clockwise until they no longer move.

  • The middle four knobs are held in place by friction and do not have a way to keep them in the correct position. When reassembling the middle four knobs, make sure to line up the mark on the knob with the left-most mark on the front panel.

Aggiungi Commento

Insert two plastic opening tools behind the tuning knob. With some force, pry the knob off of the radio.
  • Insert two plastic opening tools behind the tuning knob.

  • With some force, pry the knob off of the radio.

  • Two opening tools are needed so that you don't break the knob or connector by applying uneven force.

Aggiungi Commento

Repeat the above procedure with the remaining knobs. The final knob will have a power knob on the end of it. When reassembling, put the power knob on last. The final knob will have a power knob on the end of it. When reassembling, put the power knob on last.
  • Repeat the above procedure with the remaining knobs.

  • The final knob will have a power knob on the end of it. When reassembling, put the power knob on last.

Aggiungi Commento

Conclusione

To reassemble your device, align the buttons and push them on.

Un'altra persona ha completato questa guida.

Matt Williams

Membro da: 20/10/2013

133 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 11-37, Amido Fall 2013 Membro di Cal Poly, Team 11-37, Amido Fall 2013

CPSU-AMIDO-F13S11G37

4 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 10

Ultimi 30 Giorni: 36

Tutti i Tempi: 2,746