Salta al contenuto principale

Cleaning Function Buttons

Cosa ti serve

  1. Cleaning Function Buttons, Front and Rear Cover: passo 1, immagine 1 di 2 Cleaning Function Buttons, Front and Rear Cover: passo 1, immagine 2 di 2
    • Remove wrist strap and battery.

  2. Cleaning Function Buttons: passo 2, immagine 1 di 3 Cleaning Function Buttons: passo 2, immagine 2 di 3 Cleaning Function Buttons: passo 2, immagine 3 di 3
    • Remove 2 screws from each side of the camera (4 total, 0.102 in).

    • Remove 2 screws from the bottom on the camera (0.138 in).

    • Do not mix the 4 side screws with the 2 bottoms ones; they are different sizes.

  3. Cleaning Function Buttons: passo 3, immagine 1 di 3 Cleaning Function Buttons: passo 3, immagine 2 di 3 Cleaning Function Buttons: passo 3, immagine 3 di 3
    • Gently pull off the front cover.

    • The plate on the side should come off.

    • Gently pull off the back cover.

  4. Cleaning Function Buttons: passo 4, immagine 1 di 1
    • The cases should now be removed.

  5. Cleaning Function Buttons, Cleaning Function Buttons: passo 5, immagine 1 di 1
    • Clean around the function buttons with a cotton swab dipped in isopropyl alcohol.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Cal Poly, Team 3-32, Regan Winter 2011 Membro di Cal Poly, Team 3-32, Regan Winter 2011

CPSU-REGAN-W11S3G32

3 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,950