Salta al contenuto principale

Cirago M9030 Cover Replacement

Cosa ti serve

  1. Cirago M9030 Cover Replacement, Cover: passo 1, immagine 1 di 1
    • Use a Phillips #00 screwdriver to unscrew the four 1.1mm long screws on each corner located at the top of the cover.

  2. Cirago M9030 Cover Replacement: passo 2, immagine 1 di 1
    • Similar to the last step, flip the cover over and use a Phillips #00 screwdriver to unscrew the four 1.1mm long screws on each corner located at the bottom of the cover.

    • Remove the warranty sticker across the bottom.

  3. Cirago M9030 Cover Replacement: passo 3, immagine 1 di 2 Cirago M9030 Cover Replacement: passo 3, immagine 2 di 2
    • Gently take the cover apart using your hands separating the top and bottom.

    • The outer shell is expected to easily come apart.

Conclusione

In order to reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Ryan Sutardji

Membro da: 06/29/12

171 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 1-4, Regan SU 2012 Membro di Cal Poly, Team 1-4, Regan SU 2012

CPSU-REGAN-SU12S1G4

4 Membri

7 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 879