Introduzione

When the camera will not turn on it is possible that the battery has lost charge. This guide will show how to locate and remove the battery so that it can be charged.

Orient the camera with the lens facing to the right and the bottom of the camera facing up towards you. Grasping the camera tightly, press downward firmly on the piece with the label and slide it to the left (towards the LCD screen). The flap will then swing upward.
  • Orient the camera with the lens facing to the right and the bottom of the camera facing up towards you.

  • Grasping the camera tightly, press downward firmly on the piece with the label and slide it to the left (towards the LCD screen).

  • The flap will then swing upward.

Aggiungi Commento

With the battery now exposed, pull the dark gray tab away from the battery. The battery is no longer secured in the camera.
  • With the battery now exposed, pull the dark gray tab away from the battery.

  • The battery is no longer secured in the camera.

Aggiungi Commento

Firmly grasp each side of the battery and pull it out of its compartment.
  • Firmly grasp each side of the battery and pull it out of its compartment.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Jenn Eberts

Membro da: 10/04/2012

200 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 17-28, Amido Spring 2012 Membro di Cal Poly, Team 17-28, Amido Spring 2012

CPSU-AMIDO-S12S17G28

4 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 32

Tutti i Tempi: 1,822