Salta al contenuto principale

Canon Powershot S200 Motherboard Replacement

Cosa ti serve

  1. Canon Powershot S200 Motherboard Replacement, Battery: passo 1, immagine 1 di 2 Canon Powershot S200 Motherboard Replacement, Battery: passo 1, immagine 2 di 2
    • Slide the grey latch to open the battery compartment.

  2. Canon Powershot S200 Motherboard Replacement: passo 2, immagine 1 di 2 Canon Powershot S200 Motherboard Replacement: passo 2, immagine 2 di 2
    • Push and slide the orange retaining clip to the right to remove the battery.

  3. Canon Powershot S200 Motherboard Replacement: passo 3, immagine 1 di 1
    • Remove battery from the camera.

  4. Canon Powershot S200 Motherboard Replacement, Motherboard: passo 4, immagine 1 di 1
    • Remove the lanyard.

  5. Canon Powershot S200 Motherboard Replacement: passo 5, immagine 1 di 1
    • Position the camera so that the bottom is facing up.

    • Remove the two 2.3mm screws beneath the name plate.

    • Remove the two 2.8 mm screws surrounding the threaded tripod mount.

  6. Canon Powershot S200 Motherboard Replacement: passo 6, immagine 1 di 1
    • Remove the 3.8mm screw from the back face of the camera.

  7. Canon Powershot S200 Motherboard Replacement: passo 7, immagine 1 di 1
    • Remove the two 2.3mm screws from the right face of the camera.

  8. Canon Powershot S200 Motherboard Replacement: passo 8, immagine 1 di 1
    • Remove the two outer 3.2mm screws from the left side of the camera

    • Remove the two inner 3.7mm screws from the left side of the camera.

  9. Canon Powershot S200 Motherboard Replacement: passo 9, immagine 1 di 1
    • Pull the back face panel away from the front end of the body. This may take some wiggling and force.

  10. Canon Powershot S200 Motherboard Replacement: passo 10, immagine 1 di 2 Canon Powershot S200 Motherboard Replacement: passo 10, immagine 2 di 2
    • Remove the CF card door from the left side of the camera body.

  11. Canon Powershot S200 Motherboard Replacement: passo 11, immagine 1 di 2 Canon Powershot S200 Motherboard Replacement: passo 11, immagine 2 di 2
    • Slide the rubber digital a/v cap out of place on the front plate.

  12. Canon Powershot S200 Motherboard Replacement: passo 12, immagine 1 di 1
    • Remove the front face by sliding it off.

  13. Canon Powershot S200 Motherboard Replacement: passo 13, immagine 1 di 1
    • Remove the rubber seal that covers the right side of the viewfinder.

  14. Canon Powershot S200 Motherboard Replacement: passo 14, immagine 1 di 1
    • Remove the two 3.9mm screws that hold the laminated copper sheet.

  15. Canon Powershot S200 Motherboard Replacement: passo 15, immagine 1 di 2 Canon Powershot S200 Motherboard Replacement: passo 15, immagine 2 di 2
    • Remove the wire connections that connect along the bottom of the motherboard.

  16. Canon Powershot S200 Motherboard Replacement: passo 16, immagine 1 di 1
    • Remove the single 3.8mm screw that is on the motherboard.

  17. Canon Powershot S200 Motherboard Replacement: passo 17, immagine 1 di 1
    • Remove the motherboard from the main frame of the camera body.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Orlando Zuniga

Membro da: 04/14/11

11 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 20-70, Walters Spring 2011 Membro di Cal Poly, Team 20-70, Walters Spring 2011

CPSU-WALTERS-S11S20G70

5 Membri

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,877