Introduzione

This guide will help Canon Powershot A70 owners replace the speakers, if the camera is not giving off sound.

Open the battery compartment and remove the batteries.
  • Open the battery compartment and remove the batteries.

  • Remove the two screws that are deep in the battery compartment.

Aggiungi Commento

Open the CF compartment and remove the top screw The panel, that holds the shutter button and zoom, will come off.
  • Open the CF compartment and remove the top screw

  • The panel, that holds the shutter button and zoom, will come off.

    • Be careful! There are two small wires connecting the speaker to the body of the camera. These are very delicate so proceed with caution. Do not remove.

Aggiungi Commento

Unscrew the three small screws on the bottom.
  • Unscrew the three small screws on the bottom.

  • remove the wrist strap

Aggiungi Commento

Remove the screw in the CF compartment.
  • Remove the screw in the CF compartment.

Aggiungi Commento

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Open the rubber Digital AV Out compartment flap. Pry the battery with the IFIXIT opening tool. Carefully pull out the battery with two fingers.
  • Open the rubber Digital AV Out compartment flap.

    • Pry the battery with the IFIXIT opening tool.

    • Carefully pull out the battery with two fingers.

      • Unscrew the two screws that are now visible.

Aggiungi Commento

Starting from the bottom, carefully pull the casing off. The casing will now pivot at the top.
  • Starting from the bottom, carefully pull the casing off.

  • The casing will now pivot at the top.

    • There are three catches that hold the back casing to the body.

    • You may have to pull with some force. The rear panel will make a snapping noise when it separates from the body.

Aggiungi Commento

The interior of the camera should look like this.
  • The interior of the camera should look like this.

Aggiungi Commento

Remove the two screws at the top of the battery compartment.
  • Remove the two screws at the top of the battery compartment.

Aggiungi Commento

With your right thumb, pull back on the tab while using your left hand to pull the face of the camera away from the body. With your right thumb, pull back on the tab while using your left hand to pull the face of the camera away from the body.
  • With your right thumb, pull back on the tab while using your left hand to pull the face of the camera away from the body.

Aggiungi Commento

Remove the two clearly visible screws from the control dial
  • Remove the two clearly visible screws from the control dial

  • The dial should come off easily

Aggiungi Commento

You should be able to see the two small wires connecting the speaker to a small green plug With tweezers, carefully unplug the wires from the plug.  The wire should slide straight out
  • You should be able to see the two small wires connecting the speaker to a small green plug

    • With tweezers, carefully unplug the wires from the plug. The wire should slide straight out

  • Carefully replace the broken speaker/shutter panel with a new one

Aggiungi Commento

The removed panel should look like this
  • The removed panel should look like this

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Laura Greek

Membro da: 25/01/2010

16 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 14-40, Regan Winter 2010 Membro di Cal Poly, Team 14-40, Regan Winter 2010

CPSU-REGAN-W10S14G40

5 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 2,694