Salta al contenuto principale

Canon PowerShot SD700 Outside Case Replacement

Cosa ti serve

  1. Canon PowerShot SD700 Outside Case Replacement, Outside Case: passo 1, immagine 1 di 1
    • Turn off the camera by pressing the power button above the LCD screen.

  2. Canon PowerShot SD700 Outside Case Replacement: passo 2, immagine 1 di 1
    • Remove the two, small screws on the bottom of the camera using a Phillip's #00 screwdriver.

  3. Canon PowerShot SD700 Outside Case Replacement: passo 3, immagine 1 di 1
    • Use a Phillips #00 screwdriver to remove the two, small screws on the right side of the camera.

  4. Canon PowerShot SD700 Outside Case Replacement: passo 4, immagine 1 di 1
    • Use a Phillips #00 screwdriver to remove the screw on the left of the camera under the A/V out Digital label.

  5. Canon PowerShot SD700 Outside Case Replacement: passo 5, immagine 1 di 1
    • Use a Phillips #00 screwdriver, remove the screw on the bottom of the camera near the battery and memory card slots.

    • This screw will be longer than the rest of the screws.

  6. Canon PowerShot SD700 Outside Case Replacement: passo 6, immagine 1 di 1
    • Remove the front, back, and side casings from the camera and set to the side.

Conclusione

To reassemble your device, follow steps 1-6 instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Emilio Rossi

Membro da: 04/07/11

113 Reputazione

3 Guide realizzate

Team

Cal Poly, Team 9-71, Walters Spring 2011 Membro di Cal Poly, Team 9-71, Walters Spring 2011

CPSU-WALTERS-S11S9G71

4 Membri

9 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 12

Tutti i Tempi: 1,449