Parti

Nessuna parte richiesta.

Unscrew five Phillips screws using a #0 Phillips screwdriver. One screw is on upper right corner of the back panel.
  • Unscrew five Phillips screws using a #0 Phillips screwdriver.

  • One screw is on upper right corner of the back panel.

  • The other four screws are on the bottom of the camera.

Aggiungi Commento

Open memory card cover by moving the slide switch toward the top end of of the camera.
  • Open memory card cover by moving the slide switch toward the top end of of the camera.

  • Remove the memory card from the slot.

Aggiungi Commento

Remove the rear cover from the rest of the camera.
  • Remove the rear cover from the rest of the camera.

  • This may require gentle rocking of the case to free it.

Aggiungi Commento

Unscrew the four Philips screws from the side of the casing and one screw from the bottom using a #0 Phillips screwdriver. Unscrew the four Philips screws from the side of the casing and one screw from the bottom using a #0 Phillips screwdriver.
  • Unscrew the four Philips screws from the side of the casing and one screw from the bottom using a #0 Phillips screwdriver.

Aggiungi Commento

Free the front cover from the rest of the camera.
  • Free the front cover from the rest of the camera.

  • The cover may require gentle rocking to remove.

Aggiungi Commento

Linea Traguardo

Un'altra persona ha completato questa guida.

Nathan Balcom

Membro da: 21/01/2010

81 Reputazione

8 Guide realizzate

Team

Cal Poly, Team 16-28, Maness Winter 2010 Membro di Cal Poly, Team 16-28, Maness Winter 2010

CPSU-MANESS-W10S16G28

4 Membri

9 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,438