Introduzione

The following steps will help you replace the flash assembly for the Canon PowerShot A3400 model. You would want to do this if the camera's flash is no longer functioning and you have exhausted your troubleshooting to the point where the source of the issue lies with the flash assembly.

Parti

Nessuna parte richiesta.

Place thumb on area right next to where it says open and slide to the right to open.
  • Place thumb on area right next to where it says open and slide to the right to open.

Aggiungi Commento

Remove the battery by pushing the orange object outwards; the battery will spring up and out.
  • Remove the battery by pushing the orange object outwards; the battery will spring up and out.

Aggiungi Commento

Remove the two 5.00 mm screws in the bottom of the casing with a Philips #000 screwdriver Remove the two 5.00 mm screws in the bottom of the casing with a Philips #000 screwdriver
  • Remove the two 5.00 mm screws in the bottom of the casing with a Philips #000 screwdriver

Aggiungi Commento

Place the camera on to the side that has the image stabilizer label. Remove the 5.00 mm screws that are on this side using the screwdriver.
  • Place the camera on to the side that has the image stabilizer label.

  • Remove the 5.00 mm screws that are on this side using the screwdriver.

Aggiungi Commento

Place camera on to the side with the A/V Out Digital Cover facing up.
  • Place camera on to the side with the A/V Out Digital Cover facing up.

  • Remove this visible 5.00 mm screw.

  • Pull the A/V Out Digital cover back to uncover the next step.

Aggiungi Commento

Remove the 5.00 mm screw from behind the cover.
  • Remove the 5.00 mm screw from behind the cover.

Aggiungi Commento

Make sure the battery cover is open.
  • Make sure the battery cover is open.

Aggiungi Commento

Turn the camera onto the side with the A/V out Digital cover. Use your finger to pull this tab to the right.
  • Turn the camera onto the side with the A/V out Digital cover.

  • Use your finger to pull this tab to the right.

Aggiungi Commento

Remove the lens side by using your fingers or a spudger to pry it gently open. Try to pry it loose all around that side so that it is easier to pull off. Try to pry it loose all around that side so that it is easier to pull off.
  • Remove the lens side by using your fingers or a spudger to pry it gently open.

  • Try to pry it loose all around that side so that it is easier to pull off.

Aggiungi Commento

Using your fingers, pull the screen side gently off. Try to loosen it all around that side so that it is easier to try and pull it off. Try to loosen it all around that side so that it is easier to try and pull it off.
  • Using your fingers, pull the screen side gently off.

  • Try to loosen it all around that side so that it is easier to try and pull it off.

Aggiungi Commento

Remove the three 5 mm screws Remove the three 5 mm screws Remove the three 5 mm screws
  • Remove the three 5 mm screws

Aggiungi Commento

Remove the screen by pulling at the two points as shown. Remove the screen by pulling at the two points as shown. Remove the screen by pulling at the two points as shown.
  • Remove the screen by pulling at the two points as shown.

Aggiungi Commento

Remove the metal plate with the plastic opening tool. Remove the metal plate with the plastic opening tool.
  • Remove the metal plate with the plastic opening tool.

Aggiungi Commento

Remove the 5 mm screw Remove the 5 mm screw
  • Remove the 5 mm screw

Aggiungi Commento

Gently pull the flash assembly away. Gently pull the flash assembly away. Gently pull the flash assembly away.
  • Gently pull the flash assembly away.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Emily Pretorius

Membro da: 13/01/2015

325 Reputazione

3 Guide realizzate

Team

USF Tampa, Team 1-1, Sullivan Winter 2015 Membro di USF Tampa, Team 1-1, Sullivan Winter 2015

USFT-SULLIVAN-W15S1G1

3 Membri

4 Guide realizzate

easy to take off but waste of putting it back together..

The Heat - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 244