Introduzione

Take out old, dead batteries. Then replace them with new ones.

Place the camera so the battery cover is facing up, as shown in the picture. Gently push on the outer battery cover until you hear a click, and then release.
  • Place the camera so the battery cover is facing up, as shown in the picture.

  • Gently push on the outer battery cover until you hear a click, and then release.

Aggiungi Commento

To open the inner battery cover, push down on the grey latch until you hear a click, and then release. Remove the dead batteries from the camera.
  • To open the inner battery cover, push down on the grey latch until you hear a click, and then release.

  • Remove the dead batteries from the camera.

Aggiungi Commento

After removing the batteries, insert the new batteries in the proper direction.
  • After removing the batteries, insert the new batteries in the proper direction.

  • Now push the black, inner cover down until you hear a click to secure the batteries in place.

  • Push down and forward on the outer cover to secure the latch. Your camera will now be fully charged.

Aggiungi Commento

Conclusione

Congratulations, you're done.

Ellen Chambers

Membro da: 05/01/2011

231 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 7-37, Regan Winter 2011 Membro di Cal Poly, Team 7-37, Regan Winter 2011

CPSU-REGAN-W11S7G37

4 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 7

Tutti i Tempi: 1,591