Aggiusta la tua roba Comunità Store

Canon Pixma MP480 Buttons Replacement

Introduzione

Use this guide to replace the broken buttons to get back full functionality of your printer.

Cosa ti serve

  1. Canon Pixma MP480 Buttons Replacement, Rear and Side Panel: passo 1, immagine 1 di 2 Canon Pixma MP480 Buttons Replacement, Rear and Side Panel: passo 1, immagine 2 di 2

    • Remove the two 7.9 mm screws using a Phillips #1 screwdriver.

    Traduci

  2. Canon Pixma MP480 Buttons Replacement: passo 2, immagine 1 di 1

    • Lift up the back cover to remove it.

    • You may need to lift firmly as it requires quite a bit of force.

    Traduci

  3. Canon Pixma MP480 Buttons Replacement: passo 3, immagine 1 di 1

    • Open the front tray.

    Traduci

  4. Canon Pixma MP480 Buttons Replacement: passo 4, immagine 1 di 2 Canon Pixma MP480 Buttons Replacement: passo 4, immagine 2 di 2

    • Open the scanner compartment.

    • Make sure the blue lever locks into place to keep the compartment open.

    Traduci

  5. Canon Pixma MP480 Buttons Replacement: passo 5, immagine 1 di 2 Canon Pixma MP480 Buttons Replacement: passo 5, immagine 2 di 2

    • Remove the blue lever from its slot by pushing it back and twisting clockwise.

    • Close the scanner compartment and cover.

    Traduci

  6. Canon Pixma MP480 Buttons Replacement: passo 6, immagine 1 di 2 Canon Pixma MP480 Buttons Replacement: passo 6, immagine 2 di 2

    • Pry open the side cover with the plastic opening tool.

    Traduci

  7. Canon Pixma MP480 Buttons Replacement: passo 7, immagine 1 di 2 Canon Pixma MP480 Buttons Replacement: passo 7, immagine 2 di 2

    • Flip the printer over so that the bottom of the printer is facing you.

    • Use the plastic opening tool to remove the corner of the side panel from the plastic pin.

    Traduci

  8. Canon Pixma MP480 Buttons Replacement: passo 8, immagine 1 di 2 Canon Pixma MP480 Buttons Replacement: passo 8, immagine 2 di 2

    • Use the plastic opening tool to loosen the side panel from the bottom of the printer.

    Traduci

  9. Canon Pixma MP480 Buttons Replacement, LCD: passo 9, immagine 1 di 2 Canon Pixma MP480 Buttons Replacement, LCD: passo 9, immagine 2 di 2

    • Using the plastic opening tool, pry off the top cover of the LCD assembly.

    • Pry around the front and side edges for the easiest removal.

    Traduci

  10. Canon Pixma MP480 Buttons Replacement: passo 10, immagine 1 di 1

    • After removing the top cover of the LCD assembly, remove the LCD using the plastic opening tool.

    Traduci

  11. Canon Pixma MP480 Buttons Replacement: passo 11, immagine 1 di 1

    • Gently pull the ribbon cable to remove the LCD completely.

    Traduci

  12. Canon Pixma MP480 Buttons Replacement, Buttons: passo 12, immagine 1 di 1

    • Locate the buttons on the top of the printer.

    Traduci

  13. Canon Pixma MP480 Buttons Replacement: passo 13, immagine 1 di 1

    • Using the plastic opening tool, gently pry under the button cover to remove it from its fixture.

    Traduci

  14. Canon Pixma MP480 Buttons Replacement: passo 14, immagine 1 di 2 Canon Pixma MP480 Buttons Replacement: passo 14, immagine 2 di 2

    • Remove the five 7.7 mm screws using a Phillips #1 screwdriver.

    Traduci

  15. Canon Pixma MP480 Buttons Replacement: passo 15, immagine 1 di 2 Canon Pixma MP480 Buttons Replacement: passo 15, immagine 2 di 2

    • Using the plastic opening tool, gently pry around the cover behind the LCD screen to remove it from its fixture.

    Traduci

  16. Canon Pixma MP480 Buttons Replacement: passo 16, immagine 1 di 2 Canon Pixma MP480 Buttons Replacement: passo 16, immagine 2 di 2

    • Remove the two 7.8 mm screws using a Phillips #1 screwdriver.

    Traduci

  17. Canon Pixma MP480 Buttons Replacement: passo 17, immagine 1 di 1

    • Gently pull the LCD screen up to remove it from its fixture.

    Traduci

  18. Canon Pixma MP480 Buttons Replacement: passo 18, immagine 1 di 1

    • Use the plastic opening tool to pry off the plastic button assembly.

    Traduci

  19. Canon Pixma MP480 Buttons Replacement: passo 19, immagine 1 di 1

    • Gently pull the plastic button assembly up to remove it.

    • The plastic button assembly has a ribbon cable connected on the bottom, so be careful pulling it.

    Traduci

  20. Canon Pixma MP480 Buttons Replacement: passo 20, immagine 1 di 1

    • Remove the ribbon cable connected to the backside of the plastic button assembly.

    Traduci

  21. Canon Pixma MP480 Buttons Replacement: passo 21, immagine 1 di 2 Canon Pixma MP480 Buttons Replacement: passo 21, immagine 2 di 2

    • Remove the seven 8.7 mm screws using the Phillips #1 screwdriver.

    Traduci

  22. Canon Pixma MP480 Buttons Replacement: passo 22, immagine 1 di 3 Canon Pixma MP480 Buttons Replacement: passo 22, immagine 2 di 3 Canon Pixma MP480 Buttons Replacement: passo 22, immagine 3 di 3

    • Locate the spring that holds the PCB in place on the bottom left of the plastic button assembly.

    • Gently lift the spring and pull the board out of its plastic button assembly.

    Traduci

  23. Canon Pixma MP480 Buttons Replacement: passo 23, immagine 1 di 1

    • Remove the buttons from the plastic button assembly.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 8 altri collaboratori

Khutug Dorjsuren

Membro da: 01/14/13

114 Reputazione

2 Guide realizzate

Distintivi: 7

+4 altri distintivi

Team

Cal Poly, Team 19-41, Regan Winter 2013 Membro di Cal Poly, Team 19-41, Regan Winter 2013

CPSU-REGAN-W13S19G41

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 3

Tutti i Tempi: 1,684