Introduzione

If your printed documents or images are becoming distorted due to a dysfunctional printhead, use this guide to replace the printhead.

Strumenti

Nessun attrezzo richiesto.

Parti

Nessuna parte richiesta.

Press the power button to turn on the printer.
  • Press the power button to turn on the printer.

Aggiungi Commento

Pull down the front output tray cover.
  • Pull down the front output tray cover.

Aggiungi Commento

Lift the printer lid.
  • Lift the printer lid.

Aggiungi Commento

Allow the belt, containing ink cartridges, to adjust and center so that the ink cartridges are visible.
  • Allow the belt, containing ink cartridges, to adjust and center so that the ink cartridges are visible.

Aggiungi Commento

Push in the white clip to release the ink cartridge from the printhead. Lift the ink cartridge from the printhead.
  • Push in the white clip to release the ink cartridge from the printhead.

  • Lift the ink cartridge from the printhead.

  • Repeat this process for the remaining ink cartridges.

  • You have successfully removed all ink cartridges.

Aggiungi Commento

After removing all ink cartridges, lift the printhead lock lever.
  • After removing all ink cartridges, lift the printhead lock lever.

Aggiungi Commento

Pull up and lift out the black piece that previously held the ink cartridges. This is the printhead.
  • Pull up and lift out the black piece that previously held the ink cartridges. This is the printhead.

Aggiungi Commento

You have successfully removed your printhead.
  • You have successfully removed your printhead.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Caitlyn

Membro da: 07/10/2014

506 Reputazione

4 Guide realizzate

Team

USF Tampa, Team 1-3, Leahy Fall 2014 Membro di USF Tampa, Team 1-3, Leahy Fall 2014

USFT-LEAHY-F14S1G3

3 Membri

4 Guide realizzate

fairly helpful, especially the photo's. but I need advice on how to clean the printhead before trying to replace it,

a1halber - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 13

Ultimi 30 Giorni: 70

Tutti i Tempi: 3,580