Introduzione

This guide will teach you how to replace ink cartridges for the Bubblejet i80.

Remove the two screws on the back of the cartridge.
  • Remove the two screws on the back of the cartridge.

Aggiungi Commento

With a sliding motion remove the black plastic pieces. With a sliding motion remove the black plastic pieces.
  • With a sliding motion remove the black plastic pieces.

Aggiungi Commento

With force pull apart the casing. With force pull apart the casing. With force pull apart the casing.
  • With force pull apart the casing.

Aggiungi Commento

Push the cartridge in and then pull the cartridge up to remove it. Push the cartridge in and then pull the cartridge up to remove it.
  • Push the cartridge in and then pull the cartridge up to remove it.

Aggiungi Commento

Place the black cartridge into the top slot and then push down to click into place. Place the colored cartridge into the bottom slot and then push down to click into place.
  • Place the black cartridge into the top slot and then push down to click into place.

  • Place the colored cartridge into the bottom slot and then push down to click into place.

Aggiungi Commento

Complete steps 1-3 in reverse order to close the lid.
  • Complete steps 1-3 in reverse order to close the lid.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Andrew

Membro da: 14/10/2011

15 Reputazione

1 Guida realizzata

Team

James Madison, Team 2-3, Allen Fall 2011 Membro di James Madison, Team 2-3, Allen Fall 2011

JMU-ALLEN-F11S2G3

2 Membri

1 Guida realizzata

Why go through all this hassle? Just turn on the printer and open the black smoke color door, the cartridge should return to center position where you have to just press the tab on the left side of each ink cartridge, tip the cartridge up and snap the new one in. takes less than 1 minute.

The printer is a great little work horse and really gets the job done!

filmwrk - Replica

Yes, my sentiments exactly! As I was reading these directions I was wondering what non-tech person did not even try lifting up the black lid to replace the cartridges? This is easy. Geez, a person could break their printer following the above directions with the screwdriver!!!

Nancy - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 11

Tutti i Tempi: 3,231