Salta al contenuto principale

Canon AE-1 SLR Lens Mount Replacement

Cosa ti serve

  1. Canon AE-1 SLR Lens Mount Replacement, SLR Lens Mount: passo 1, immagine 1 di 2 Canon AE-1 SLR Lens Mount Replacement, SLR Lens Mount: passo 1, immagine 2 di 2
    • Remove the first set of two screws from the lens outer casing using a Phillips #00 screwdriver.

    • The first set of screws is located on the front and bottom of the lens casing.

  2. Canon AE-1 SLR Lens Mount Replacement: passo 2, immagine 1 di 2 Canon AE-1 SLR Lens Mount Replacement: passo 2, immagine 2 di 2
    • Remove the remaining two screws from the right and left sides of the lens outer casing using a Phillips #00 screwdriver.

  3. Canon AE-1 SLR Lens Mount Replacement: passo 3, immagine 1 di 1
    • Remove the lens casing by pulling it away from the body of the camera.

  4. Canon AE-1 SLR Lens Mount Replacement: passo 4, immagine 1 di 1
    • Remove the four #00 screws from the SLR lens mount using a Phillips #00 screwdriver.

  5. Canon AE-1 SLR Lens Mount Replacement: passo 5, immagine 1 di 3 Canon AE-1 SLR Lens Mount Replacement: passo 5, immagine 2 di 3 Canon AE-1 SLR Lens Mount Replacement: passo 5, immagine 3 di 3
    • Pull the SLR lens mount away from the body of the camera.

    • Be aware that a pin will fall out when the SLR lens mount is removed.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Joe Blumberg

Membro da: 10/04/11

213 Reputazione

1 Guida realizzata

Team

UW Stout, Team 5-1, Zhou Fall 2011 Membro di UW Stout, Team 5-1, Zhou Fall 2011

UWSTOUT-ZHOU-F11S5G1

3 Membri

12 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 6

Ultimi 7 Giorni: 14

Ultimi 30 Giorni: 68

Tutti i Tempi: 11,692