Introduzione

Damaged presserfoot? It is easy to replace and this guide will take you through the necessary steps.

Make sure the presser foot is in the up position.
  • Make sure the presser foot is in the up position.

  • The switch should be up, not in the vertical position.

Aggiungi Commento

Adjust the needle to the top of its stroke using the hand wheel.
  • Adjust the needle to the top of its stroke using the hand wheel.

Aggiungi Commento

Lift the arm on the back of the presser foot assembly to release the foot. Lift the arm on the back of the presser foot assembly to release the foot.
  • Lift the arm on the back of the presser foot assembly to release the foot.

Aggiungi Commento

Remove the presser foot.
  • Remove the presser foot.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Kevin Bickers

Membro da: 05/02/2014

601 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 2-12, Amido Winter 2014 Membro di Cal Poly, Team 2-12, Amido Winter 2014

CPSU-AMIDO-W14S2G12

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 8

Tutti i Tempi: 751