Introduzione

In this guide, you will see why your Brother PT-1290 isn't powering up correctly or at all.

First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage. First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage. First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage.
  • First, flip over your label maker and push down on the top part(by the face plate) and push on the circle part with ridges. Next open the label maker carefully to prevent any damage.

Aggiungi Commento

Once the label maker is open, remove the six AAA drained batteries.
  • Once the label maker is open, remove the six AAA drained batteries.

  • If your using an AC adapter, replace the old one with the new HQRP adapter.

  • If you see white on the batteries, that would be corrosion. Be careful when disposing.

Aggiungi Commento

Now place in the new six AAA batteries. Make sure the batteries are correctly in and touching the golden prongs. Make sure the batteries are correctly in and touching the golden prongs.
  • Now place in the new six AAA batteries.

  • Make sure the batteries are correctly in and touching the golden prongs.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Lorraine Canez

Membro da: 25/10/2014

301 Reputazione

3 Guide realizzate

Team

Gateway, Team 1-4, Johnson Fall 2014 Membro di Gateway, Team 1-4, Johnson Fall 2014

GCC-JOHNSON-F14S1G4

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 7

Tutti i Tempi: 277