Cosa ti serve
-
-
Using a 2.5 mm hex wrench, remove the two 13 mm screws from the bottom of the speaker.
Chiedi a FixBot
-
-
-
Push up on the back of the cover until it slides up slightly.
-
Pull the cover up and away from the speaker backing.
-
-
-
-
Using the screwdriver with the T-10 star tip, remove the 6.75 mm. screws marked in red.
-
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 18 persone hanno completato questa guida.
Team
Texas Tech, Team 22-4, Rauch Fall 2015 Membro di Texas Tech, Team 22-4, Rauch Fall 2015
TTU-RAUCH-F15S22G4
3 Membri
5 guide realizzate
11Commenti sulla guida
Where i can buy one them battery model?
Just ordered a “Used, in good shape”, and it seems to be, however, it’s the REALLY original model, with the solid flap on the front, that turns into the stand. SN: 054867920870604AE. Guessing this is NOT the “Soundlink II”, but the original model. Instructions that came with it claim battery will last up to 3 hours. JUST IN CASE this battery is shot, was looking into what’s involved to replace it. However, mine being older, wondering if this battery would still fit?
Thanks, Bob.
How do I get a used replacement battery for this in Nigeria? Please contact me on johnpaulokenyodo@gmail.com if any. Thanks
How much the battery only
