Introduzione

In this guide you'll be opening the battery housing of your Blu Studio, this is the second step you'll take whenever you replace or add internal parts (excluding the SIMs and SD cards).

Either fingernails or plastic prying tools can be used for lifting once all the screws have been removed.

Parti

Nessuna parte richiesta.

Begin by making sure your Blu Studio is turned off.
  • Begin by making sure your Blu Studio is turned off.

Aggiungi Commento

To begin the removal of your back panel, first locate the lift tab on the bottom-right corner. To begin the removal of your back panel, first locate the lift tab on the bottom-right corner.
  • To begin the removal of your back panel, first locate the lift tab on the bottom-right corner.

Aggiungi Commento

Next, gently slide your thumb (or plastic tool if you prefer) down the seem running the length of your Blu Studio until the rear panel is completely removed. Your rear panel should be placed nearby and in a safe location until you are finished with your task.
  • Next, gently slide your thumb (or plastic tool if you prefer) down the seem running the length of your Blu Studio until the rear panel is completely removed.

  • Your rear panel should be placed nearby and in a safe location until you are finished with your task.

Aggiungi Commento

With your back panel already removed from the previous guide you'll need to acquire a Philips head screw driver size (PH00) With your back panel already removed from the previous guide you'll need to acquire a Philips head screw driver size (PH00)
  • With your back panel already removed from the previous guide you'll need to acquire a Philips head screw driver size (PH00)

Aggiungi Commento

Next proceed to remove all 16 screws (2.5mm in length), all screws are the same size so getting them mixed up will not be an issue later on.
  • Next proceed to remove all 16 screws (2.5mm in length), all screws are the same size so getting them mixed up will not be an issue later on.

  • One of the lower right hand screws will be hidden under a sticker.

Aggiungi Commento

After removing all 16 screws you can begin the process of removing the battery housing panel.
  • After removing all 16 screws you can begin the process of removing the battery housing panel.

  • You will need to use the thinner plastic prying tool to slowly outline the seem of the case starting from the top (near the camera).

  • Try to be careful around the side buttons as the plastic is weakest there.

  • After the top half of the case has been opened insert the thicker prying tool to keep the case open. This will help as the battery and battery housing have a suction cup like action that keeps them from separating.

Aggiungi Commento

At this point your battery, motherboard, rear camera, and front camera should all be readily available for fixing. Happy fixing.
  • At this point your battery, motherboard, rear camera, and front camera should all be readily available for fixing. Happy fixing.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Erik reinbolt

Membro da: 23/09/2014

1.375 Reputazione

3 Guide realizzate

Team

USF Tampa, Team 9-1, Blackwell Fall 2014 Membro di USF Tampa, Team 9-1, Blackwell Fall 2014

USFT-BLACKWELL-F14S9G1

3 Membri

8 Guide realizzate

I have the same phone, This helps me fix the broken screen that i am trying to replace. I need complete screen replacement guide

sandip patel - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 2,829