Introduzione
Follow this guide to install the keyboard in the Blackberry Pearl 8100.
Cosa ti serve
-
-
Begin by removing the back panel; this can be done by pressing the silver button on the backside of the Blackberry 8100, while simultaneously sliding the back panel off.
-
-
-
Using a 1.5 mm Hex screwdriver, remove the two screws that hold the two panels together.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.