Introduzione

How to replace the BlackBerry 7100g keypad cover.

Turn over your BalckBerry 7100g so that the back cover is facing up.
  • Turn over your BalckBerry 7100g so that the back cover is facing up.

  • Locate the battery cover release button near the bottom of the back panel.

Aggiungi Commento

Push down on the release button with one thumb. Slide the battery cover off with the other thumb. Slide the battery cover off with the other thumb.
  • Push down on the release button with one thumb.

  • Slide the battery cover off with the other thumb.

Aggiungi Commento

Remove the battery from the battery housing by flipping up the top of the battery.
  • Remove the battery from the battery housing by flipping up the top of the battery.

Aggiungi Commento

Locate the silver strip near the top of your BlackBerry. Use a plastic opening tool to pry off the edge of the silver lining. Slide the tool along the length of the silver strip to completely remove it.
  • Locate the silver strip near the top of your BlackBerry.

  • Use a plastic opening tool to pry off the edge of the silver lining.

  • Slide the tool along the length of the silver strip to completely remove it.

Aggiungi Commento

Do not lose the screws. They are quite small and can easily be misplaced. Locate and unscrew the four (4) screws using a T6 screwdriver.
  • Do not lose the screws. They are quite small and can easily be misplaced.

  • Locate and unscrew the four (4) screws using a T6 screwdriver.

Aggiungi Commento

The keypad cover may fall out of the housing when prying the housing apart. Tightly pinch the top of the front and back halves of the housing. Carefully pry the two halves of the housing apart.
  • The keypad cover may fall out of the housing when prying the housing apart.

  • Tightly pinch the top of the front and back halves of the housing.

  • Carefully pry the two halves of the housing apart.

Aggiungi Commento

You can now easily remove the "guts" of the phone from the housing.
  • You can now easily remove the "guts" of the phone from the housing.

Aggiungi Commento

Remove the keypad cover. Insert the new keypad cover.
  • Remove the keypad cover.

  • Insert the new keypad cover.

  • You are done replacing your keypad cover.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Tristan French

Membro da: 04/04/2010

16 Reputazione

2 Guide realizzate

Team

Cal Poly, Team 25-87, Amido Spring 2010 Membro di Cal Poly, Team 25-87, Amido Spring 2010

CPSU-AMIDO-S10S25G87

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 1,331