Salta al contenuto principale

Black and Decker BL3000S Motor Fan Replacement

Cosa ti serve

  1. Black and Decker BL3000S Motor Fan Replacement, Blender Base: passo 1, immagine 1 di 2 Black and Decker BL3000S Motor Fan Replacement, Blender Base: passo 1, immagine 2 di 2
    • Before disassembling the blender base, make sure the blender disconnected from any power outlet.

    • Lift the jar straight up from the base without tilting the jar.

  2. Black and Decker BL3000S Motor Fan Replacement: passo 2, immagine 1 di 1
    • Remove the top three 1/4 inch base screws using a Philip's head screwdriver.

  3. Black and Decker BL3000S Motor Fan Replacement: passo 3, immagine 1 di 2 Black and Decker BL3000S Motor Fan Replacement: passo 3, immagine 2 di 2
    • Remove the two base leg covers next to the power cord using pliers or a flat-head screwdriver.

    • This provides access to the base screws beneath.

  4. Black and Decker BL3000S Motor Fan Replacement: passo 4, immagine 1 di 1
    • Remove the following screws that secure the top and bottom halves of the base.

    • One 1/4 Phillips screw

    • One TA-20 screw

    • Both screwdrivers must have a minimum of a three inch shank (length).

    • Screwdrivers with extenders will not fit down the access holes.

  5. Black and Decker BL3000S Motor Fan Replacement: passo 5, immagine 1 di 1
    • Lift the top half of the base from the bottom half of the base to reveal the internal mechanism.

  6. Black and Decker BL3000S Motor Fan Replacement, Motor Fan: passo 6, immagine 1 di 2 Black and Decker BL3000S Motor Fan Replacement, Motor Fan: passo 6, immagine 2 di 2
    • Using pliers, remove the top nut from the fan and remove the washer.

    • Use a small towel to hold the fan in place. This makes taking off the nut easier to do.

  7. Black and Decker BL3000S Motor Fan Replacement: passo 7, immagine 1 di 1
    • Lift the fan blades from the blender base.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Andrew

Membro da: 10/04/12

209 Reputazione

4 Guide realizzate

Team

Cal Poly, Team 6-34, Regan Fall 2012 Membro di Cal Poly, Team 6-34, Regan Fall 2012

CPSU-REGAN-F12S6G34

4 Membri

6 Guide realizzate

Un commento

mon mixeur a montre des itincelles et de la fumeé quel étape puis suivre pour le réparer

abdelkarim hassi - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 22

Tutti i Tempi: 4,380