Salta al contenuto principale

Besta Super 5000 Back Cover Replacement

Cosa ti serve

  1. Besta Super 5000 Back Cover Replacement, Battery: passo 1, immagine 1 di 1
    • Turn the device over so that the barcode is facing upwards.

  2. Besta Super 5000 Back Cover Replacement: passo 2, immagine 1 di 2 Besta Super 5000 Back Cover Replacement: passo 2, immagine 2 di 2
    • Place your fingers on the battery cover arrow and pull the cover down and off the device.

  3. Besta Super 5000 Back Cover Replacement: passo 3, immagine 1 di 1
    • Pull upwards on the battery tab to remove the battery from the device.

  4. Besta Super 5000 Back Cover Replacement, Back Cover: passo 4, immagine 1 di 1
    • Remove the five screws around the edge of the device using a Phillips #0 screwdriver.

  5. Besta Super 5000 Back Cover Replacement: passo 5, immagine 1 di 1
    • Remove the two screws behind the battery using a Phillips #0 screwdriver.

  6. Besta Super 5000 Back Cover Replacement: passo 6, immagine 1 di 2 Besta Super 5000 Back Cover Replacement: passo 6, immagine 2 di 2
    • Potential for device damage: All screws must be removed before you begin this step. Do not forcefully pry apart the device with screws still in it because you may damage it.

    • Gently pry off the backing using an opening tool.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Jessie

Membro da: 09/30/14

370 Reputazione

3 Guide realizzate

Team

Ohio State, Team 1-5, Buehl Fall 2014 Membro di Ohio State, Team 1-5, Buehl Fall 2014

OSU-BUEHL-F14S1G5

4 Membri

4 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 6

Tutti i Tempi: 278