Aggiusta la tua roba Comunità Store

Bendix Magneto Rough Coil Replacement

Introduzione

Use this guide to remove the rough coil of the Bendix Magneto.

The magneto provides electrical energy to to fire a spark plug. It utilizes a rotating magnet to generate current through a coil. A bad rough coil can cause the aircraft engine to run poorly and shake.

The magneto should be routinely checked after every 500 hours of use.

Cosa ti serve

  1. Bendix Magneto Rough Coil Replacement, Rough coil: passo 1, immagine 1 di 1

    • Use a #2 Flathead screw driver to remove the five screws on the body of the magneto, indicated by the red circles.

    Traduci

  3. Bendix Magneto Rough Coil Replacement: passo 2, immagine 1 di 1

    • Locate the two screws on the right and left side of the primary circuit.

    • Remove the screws using a #2 Flathead screw driver.

    Traduci

  4. Bendix Magneto Rough Coil Replacement: passo 3, immagine 1 di 1

    • Remove the primary circuit and replace it.

    • The super coil may seem as though it will not come out, but it does. It can just get a little jammed.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Autore

con 5 altri collaboratori

Kelsi English

Membro da: 09/26/12

501 Reputazione

5 Guide realizzate

Distintivi: 9

+6 altri distintivi

Team

Cal Poly, Team 1-2, Propen Fall 2012 Membro di Cal Poly, Team 1-2, Propen Fall 2012

CPSU-PROPEN-F12S1G2

4 Membri

8 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 10

Tutti i Tempi: 2,956