Introduzione

This repair guide will help you with the following:

  • Install the left headphone cable
  • Fix sound coming from the left headphone
Remove the ear pads by peeling them away from the grill.
  • Remove the ear pads by peeling them away from the grill.

Aggiungi Commento

Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.
  • Remove all four 1cm screws on the inside of the headphone using a #1 Phillips head.

Aggiungi Commento

Remove the speaker from the grill by pulling it out.
  • Remove the speaker from the grill by pulling it out.

  • Remove the speaker carefully so you do not rip the wires out.

Aggiungi Commento

Desolder the red, yellow, and blue wires using a soldering iron and desoldering wick. If you need assistance, reference How To Solder and Desolder Connections. The areas where you desolder will be hot so wait until the desoldered joints are cool before handling the wires again. The areas where you desolder will be hot so wait until the desoldered joints are cool before handling the wires again.
  • Desolder the red, yellow, and blue wires using a soldering iron and desoldering wick. If you need assistance, reference How To Solder and Desolder Connections.

  • The areas where you desolder will be hot so wait until the desoldered joints are cool before handling the wires again.

Aggiungi Commento

Untie the knot in the thick main cable. Remove the main cable from the headphones by pulling it out.
  • Untie the knot in the thick main cable.

  • Remove the main cable from the headphones by pulling it out.

  • Thread the replacement cable into the hole on the bottom of the headphones. Pull the cable all the way through.

Aggiungi Commento

Re-solder the new red, yellow, and blue wires using a soldering iron. If you need assistance, reference How To Solder and Desolder Connections. The areas where you solder will be hot so wait until the solder joints are cool before handling the wires again. The areas where you solder will be hot so wait until the solder joints are cool before handling the wires again.
  • Re-solder the new red, yellow, and blue wires using a soldering iron. If you need assistance, reference How To Solder and Desolder Connections.

  • The areas where you solder will be hot so wait until the solder joints are cool before handling the wires again.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Melanie Reis

Membro da: 11/01/2013

106 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 17-19, Forte Winter 2013 Membro di Cal Poly, Team 17-19, Forte Winter 2013

CPSU-FORTE-W13S17G19

6 Membri

6 Guide realizzate

Thank you so much! your guide helped me repair my AD900x!

Anwar X - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 25

Ultimi 30 Giorni: 93

Tutti i Tempi: 3,990