Introduzione

If your system overheating, we show you how to disassemble it, clean the Cooling system and replace the CPU Thermal paste.

_______________ Video manual: _______________

Panoramica Video

Switch off the laptop and remove the battery.
  • Switch off the laptop and remove the battery.

Aggiungi Commento

The Keyboard is held by 5x locking clips. Pick up a little the one side of the Keyboard and start opening the clips one by one. Disconnect the Keyboard flex cable from the mother board and remove the KB.
  • The Keyboard is held by 5x locking clips.

  • Pick up a little the one side of the Keyboard and start opening the clips one by one.

  • Disconnect the Keyboard flex cable from the mother board and remove the KB.

  • Please SUBSCRIBE to my channel ツ

Aggiungi Commento

Remove 3x Philips screws. Disconnect the two small flex cables:
  • Remove 3x Philips screws.

  • Disconnect the two small flex cables:

    • Power On button flex cable

    • Touch pad flex cable

Aggiungi Commento

Unscrew the two Philips screws and remove the HDD / RAM Cover. Remove three screws securing the hard drive caddy (hard drive assembly). Slide the hard drive assembly to the left to disconnect it from the motherboard.
  • Unscrew the two Philips screws and remove the HDD / RAM Cover.

  • Remove three screws securing the hard drive caddy (hard drive assembly).

  • Slide the hard drive assembly to the left to disconnect it from the motherboard.

Aggiungi Commento

Disconnect the two coaxial antenna cables from the Wi-Fi card. Remove any Memory or Dummy card.
  • Disconnect the two coaxial antenna cables from the Wi-Fi card.

  • Remove any Memory or Dummy card.

Aggiungi Commento

The bottom cover is held by 10x Phillips screws. Remove them. With a plastic tool separate the Upper cover and remove it. With a plastic tool separate the Upper cover and remove it.
  • The bottom cover is held by 10x Phillips screws. Remove them.

  • With a plastic tool separate the Upper cover and remove it.

Aggiungi Commento

Disconnect: The Microphone cable The LCD Display flex cable
  • Disconnect:

    • The Microphone cable

    • The LCD Display flex cable

  • Remove 3x Pillips screws.

  • Lift the board first from the right edge.

  • There is another one cable, from the DC connector, connected to the underside of main board. We should spun the the board to disconnect the DC connector cable.

Aggiungi Commento

ASUS X55C iCore with 4GB no board RAM motherboard, model: 60-N0OMB1100 Please SUBSCRIBE to my channel  ツ

Aggiungi Commento

Disconnect the Fan cable from the Motherboard. Remove the screws (4x Phillips screws) that hold the cooling system to the Motherboard Remove the Cooling System carefully, if you don't want to break the CPU.
  • Disconnect the Fan cable from the Motherboard.

  • Remove the screws (4x Phillips screws) that hold the cooling system to the Motherboard

  • Remove the Cooling System carefully, if you don't want to break the CPU.

Aggiungi Commento

Use a  lint-free cloth to clean the old thermal compound. If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off. Use again cloth with isopropyl alcohol to clean the Thermal surface.
  • Use a lint-free cloth to clean the old thermal compound.

  • If the thermal compound is solidified, you can use a flat end of any plastic tool to scrape it off.

  • Use again cloth with isopropyl alcohol to clean the Thermal surface.

  • The Fan and Headsink are held together with a large black bar. Removing the tape at both ends, to separate the Fan from the Headsink.

  • Use a soft anti static brush and clean the Heatsink on the inside.

Aggiungi Commento

Use the same technic to clean the surface of the processor from the old thermal compound Be carefully,if you don't want to break the CPU. Be carefully,if you don't want to break the CPU.
  • Use the same technic to clean the surface of the processor from the old thermal compound

  • Be carefully,if you don't want to break the CPU.

Aggiungi Commento

Dispense a small amount of thermal compound and gently smear it over the entire processor surface. Dispense a small amount of thermal compound and gently smear it over the entire processor surface. Dispense a small amount of thermal compound and gently smear it over the entire processor surface.
  • Dispense a small amount of thermal compound and gently smear it over the entire processor surface.

Aggiungi Commento

Careful install the Cooling system with even pressure from all sides, and the bead that you placed on the surface will spread over the entire contact surface. . .
  • Careful install the Cooling system with even pressure from all sides, and the bead that you placed on the surface will spread over the entire contact surface.

  • .

  • .

  • .

  • .

  • Did you do it successfully?

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

ZFix

Membro da: 09/12/2013

150.424 Reputazione

424 Guide realizzate

Team

Master Techs Membro di Master Techs

Community

274 Membri

713 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 12

Ultimi 30 Giorni: 58

Tutti i Tempi: 3,571