Remove the battery, then unscrew the 7 3 mm Phillips screws behind the battery. Make sure they go in separate, organized piles. Unscrew the 2 4 mm Phillips head screws by the battery. Unscrew the 2 4 mm Phillips head screws by the battery.
  • Remove the battery, then unscrew the 7 3 mm Phillips screws behind the battery. Make sure they go in separate, organized piles.

  • Unscrew the 2 4 mm Phillips head screws by the battery.

Aggiungi Commento

Remove the panel above the keyboard with a plastic spudger.
  • Remove the panel above the keyboard with a plastic spudger.

Aggiungi Commento

Once the panel is removed, use the spudger to pry out the keyboard.
  • Once the panel is removed, use the spudger to pry out the keyboard.

  • Do not fully remove, for the keyboard is still attached to the ribbon cable.

Aggiungi Commento

Detach the ribbon cable from the keyboard by pulling the end of the ribbon cable that is attached inside of the laptop. Be sure to detach from the root rather than from near the middle. It should slide out with ease.
  • Detach the ribbon cable from the keyboard by pulling the end of the ribbon cable that is attached inside of the laptop.

  • Be sure to detach from the root rather than from near the middle. It should slide out with ease.

  • Now you can fully remove the keyboard from the laptop.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Joe Redfearn

Membro da: 14/04/2014

101 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 13-29, Maness Spring 2014 Membro di Cal Poly, Team 13-29, Maness Spring 2014

CPSU-MANESS-S14S13G29

4 Membri

8 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 181