Salta al contenuto principale

Asus Eee PC 1008ha Trackpad Mouse Clicker Replacement

Cosa ti serve

  1. Asus Eee PC 1008ha Trackpad Mouse Clicker Replacement, Trackpad Mouse Clicker (the button's on the bottom of the trackpad): passo 1, immagine 1 di 1
    • Use an opening too to carefully separate the palm rest assembly from the base of the laptop.

    • Move the opening tool around the perimeter of the palm rest and the base and use it as a wedge.

    • You will need to undo the clips holding the two parts together with the opening tool. Be careful not to break the clips.

  2. Asus Eee PC 1008ha Trackpad Mouse Clicker Replacement: passo 2, immagine 1 di 2 Asus Eee PC 1008ha Trackpad Mouse Clicker Replacement: passo 2, immagine 2 di 2
    • Use a spudger to open the cable locks and remove the ribbon cables using your hands or tweezers.

    • Using a Phillips #00 screwdriver, remove the two 4 mm screws on either side of the circuit board.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Team

Cal Poly, Team 21-52, Johann Spring 2013 Membro di Cal Poly, Team 21-52, Johann Spring 2013

CPSU-JOHANN-S13S21G52

4 Membri

11 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 889