Parti

Nessuna parte richiesta.

Pull the keyboard tabs toward you while lifting up on the keyboard until it releases from it's hold.
  • Pull the keyboard tabs toward you while lifting up on the keyboard until it releases from it's hold.

  • To lift the keyboard out pull it up and away from you. Then place the keyboard on the track pad.

Aggiungi Commento

Pull the keyboard ribbon vertically from the logic board to release connection.
  • Pull the keyboard ribbon vertically from the logic board to release connection.

  • The connector may be tight and difficult to remove. If stuck try rocking the connector back and forth while pulling up until it releases. This same process can be used for many of the connectors on this device.

  • Remove battery and CD/DVD drives before proceeding any further.

Aggiungi Commento

Your computer should look approximately like this.
  • Your computer should look approximately like this.

Aggiungi Commento

Remove the two silver Phillips #1 screws that attach the heat shield to the metal framework.
  • Remove the two silver Phillips #1 screws that attach the heat shield to the metal framework.

  • Lift the heat shield up and toward you.

Aggiungi Commento

Pull the PRAM battery cable vertically upward to disconnect it.
  • Pull the PRAM battery cable vertically upward to disconnect it.

  • Remove the battery by pulling up and to the left.

Aggiungi Commento

Remove the two T8 Torx screws that attach the heat sink to the processor.
  • Remove the two T8 Torx screws that attach the heat sink to the processor.

  • Remove the long silver Phillips #1 screw from the heat sink.

Aggiungi Commento

Lift up the heat sink unit from the left side and remove.
  • Lift up the heat sink unit from the left side and remove.

Aggiungi Commento

Lift the processor on the right side and pull directly up.
  • Lift the processor on the right side and pull directly up.

  • The RAM chips should be in the slots on the processor.

Aggiungi Commento

After removing the RAM, your laptop should now look like this.
  • After removing the RAM, your laptop should now look like this.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Ian

Membro da: 18/04/2011

57 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 4-2, Regan Spring 2011 Membro di Cal Poly, Team 4-2, Regan Spring 2011

CPSU-REGAN-S11S4G2

4 Membri

7 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 1

Tutti i Tempi: 1,786