Introduzione

If the USB ports on the back of your display do not register connected devices or if they have no power, you may need to replace the USB port itself. This is a relatively easy fix. The tools required for this section are the spudger and the PH 2 screwdriver.

Before starting, make sure the display is UNPLUGGED.  Failure to do so can result in shock and serious injury. Flip the Cinema Display so it is on its face and the feet are pointed away from you. Using the PH 2 screwdriver, unscrew the three feet screws (9.52 x 4.43 mm).
  • Before starting, make sure the display is UNPLUGGED. Failure to do so can result in shock and serious injury.

  • Flip the Cinema Display so it is on its face and the feet are pointed away from you.

  • Using the PH 2 screwdriver, unscrew the three feet screws (9.52 x 4.43 mm).

  • Remove the back foot from the hinge mount by gently pulling it upwards.

Aggiungi Commento

Remove the back plate screws (5.25 x 4.43 mm) using the PH 2 screw driver. Once the screws are removed, lift the back plate off of the display. Completely remove the back plate and set it aside.
  • Remove the back plate screws (5.25 x 4.43 mm) using the PH 2 screw driver.

  • Once the screws are removed, lift the back plate off of the display.

  • Completely remove the back plate and set it aside.

Aggiungi Commento

Kit RAM Mac
Accelera il Mac. Porta la memoria al massimo.
Kit RAM Mac
Metti più memoria nel tuo Mac.
Unscrew the USB cable routing screw (8 x 2.72mm) using the PH 2 screwdriver.
  • Unscrew the USB cable routing screw (8 x 2.72mm) using the PH 2 screwdriver.

Aggiungi Commento

Unplug the USB cable connector from the screen box.
  • Unplug the USB cable connector from the screen box.

Aggiungi Commento

Using the PH 2 screwdriver, unscrew the two screws (4.85 x 2.94mm) on the USB ports. Using the PH 2 screwdriver, unscrew the two screws (4.85 x 2.94mm) on the USB ports.
  • Using the PH 2 screwdriver, unscrew the two screws (4.85 x 2.94mm) on the USB ports.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Kyle Suguitan

Membro da: 01/04/2011

21 Reputazione

1 Guida realizzata

Team

Cal Poly, Team 10-41, Forte Spring 2011 Membro di Cal Poly, Team 10-41, Forte Spring 2011

CPSU-FORTE-S11S10G41

5 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 6

Tutti i Tempi: 3,703