Introduzione

Use this guide to replace the rear facing camera on your Alcatel One Touch Fierce.

Pry with a plastic opening tool, or your fingernail, in the divot at the bottom left corner of the phone. Lift the rear case by the corner nearest the divot and remove it from the phone.
  • Pry with a plastic opening tool, or your fingernail, in the divot at the bottom left corner of the phone.

  • Lift the rear case by the corner nearest the divot and remove it from the phone.

Aggiungi Commento

Remove the 11 Phillips #000 screws. The midframe should lift free. The midframe should lift free.
  • Remove the 11 Phillips #000 screws.

  • The midframe should lift free.

Aggiungi Commento

Use a pair of tweezers to gently disconnect the camera connector and remove the rear facing camera. Use a pair of tweezers to gently disconnect the camera connector and remove the rear facing camera.
  • Use a pair of tweezers to gently disconnect the camera connector and remove the rear facing camera.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Cody Stouffer

Membro da: 30/10/2014

380 Reputazione

2 Guide realizzate

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 11

Tutti i Tempi: 1,936