Salta al contenuto principale

Acer Iconia Tab A500 Battery Replacement

Cosa ti serve

  1. Acer Iconia Tab A500 Battery Replacement, Back Case: passo 1, immagine 1 di 1
    • To start, gently separate one corner of the case using the black spudger.

  2. Acer Iconia Tab A500 Battery Replacement: passo 2, immagine 1 di 1
    • Once you have successfully pried the spudger in between the front case and back case, continue do so around the entire tablet until the back case is completely disconnected.

  3. Acer Iconia Tab A500 Battery Replacement, Battery: passo 3, immagine 1 di 1
    • Remove the 5mm screws that are securing the battery to the rest of the tablet.

    • Use the Phillips #00 Screwdriver to remove the 5mm screws.

  4. Acer Iconia Tab A500 Battery Replacement: passo 4, immagine 1 di 1
    • Use the sharper end of the spudger to disconnect the battery from the mother board.

    • The battery connector will slide off.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 9 persone hanno completato questa guida.

Kyle Libby

Membro da: 04/07/14

1.006 Reputazione

7 Guide realizzate

Team

Cal Poly, Team 7-23, Regan Spring 2014 Membro di Cal Poly, Team 7-23, Regan Spring 2014

CPSU-REGAN-S14S7G23

4 Membri

19 Guide realizzate

2 Commenti

I just replaced my battery because it kept draining and the new battery started to charge but now it won’t charger at all so what can be wrong?

misscris0611 - Replica

Hi l have had my acer tablet for over 10 years and the acer iconiatab a500 as no been turned on for over 10 years and it is not cargering

Linda George - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 15

Tutti i Tempi: 11,389