Turn the monitor facedown. Unscrew the 5 screws holding the back cover on.
  • Turn the monitor facedown.

  • Unscrew the 5 screws holding the back cover on.

  • (This may require flipping the monitor and shaking the screws loose once they're already unscrewed)

Aggiungi Commento

Take the edge tool or a metal ruler and insert it into the bezel. Apply pressure and push down. Do the same to the right side.
  • Take the edge tool or a metal ruler and insert it into the bezel.

  • Apply pressure and push down.

  • Do the same to the right side.

  • Once side of bezel facing you is decoupled, take the back cover and pry it loose.

Aggiungi Commento

Remove the Power Button Circuit board Flat Flex Cable from the Power Supply board under the metal cage. Pull the cord back and out of the way. (It may be stuck down with adhesive)
  • Remove the Power Button Circuit board Flat Flex Cable from the Power Supply board under the metal cage.

  • Pull the cord back and out of the way.

  • (It may be stuck down with adhesive)

Aggiungi Commento

Remove the Flat Flex Cables from the Power Button Circuit Board.
  • Remove the Flat Flex Cables from the Power Button Circuit Board.

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Team

USF Tampa, Team 1-3, Brown Fall 2014 Membro di USF Tampa, Team 1-3, Brown Fall 2014

USFT-BROWN-F14S1G3

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 9

Tutti i Tempi: 439