Introduzione

You will be looking for water damage on the USB connector and replacing the 1413 USB/ANT docking connector.

Using the plastic opening tools, insert it into the edge and pry open. Use hands to help pull the back off from the front if needed.
  • Using the plastic opening tools, insert it into the edge and pry open.

  • Use hands to help pull the back off from the front if needed.

Aggiungi Commento

Locate the CON101 The white sticker indicates water exposure. White=none, Red=Exposure
  • Locate the CON101

    • The white sticker indicates water exposure. White=none, Red=Exposure

Aggiungi Commento

Remove two Phillips screws
  • Remove two Phillips screws

Aggiungi Commento

Locate P92L on CON1504 Gently peel back and remove plastic tape
  • Locate P92L on CON1504

    • Gently peel back and remove plastic tape

Aggiungi Commento

Gently Pull P92L With Fingers From CON1504 Gently Pull P92L With Fingers From CON1504 Gently Pull P92L With Fingers From CON1504
  • Gently Pull P92L With Fingers From CON1504

Aggiungi Commento

These are the antenna wires.
  • These are the antenna wires.

    • Trace these wires to locate the two antennas.

Aggiungi Commento

Locate the two antennas Desolder the two antenna wires
  • Locate the two antennas

  • Desolder the two antenna wires

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Daniel

Membro da: 07/10/2014

299 Reputazione

2 Guide realizzate

Team

USF Tampa, Team 7-4, Leahy Fall 2014 Membro di USF Tampa, Team 7-4, Leahy Fall 2014

USFT-LEAHY-F14S7G4

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 17

Tutti i Tempi: 1,004