Salta al contenuto principale

Einstellen des Hinterrad-Umwerfers einer Kettenschaltung

Inglese
Tedesco

Traduzione in corso passo 1

Passo 1
Adjusting the Rear Derailleur: passo 0, immagine 1 di 2 Adjusting the Rear Derailleur: passo 0, immagine 2 di 2
  • Bolt the derailleur to the mounting tab with an Allen wrench.

  • Be careful not to over-tighten the steel bolt, as this can strip the aluminum mounting tab.

Befestige den Umwerfer mit einem Inbusschlüssel am Rahmen.

Achte darauf die Stahlschrauben nicht zu fest anzuziehen, dies könnte die Aluminiumbefestigung beschädigen.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.