Salta al contenuto principale
Inglese
Giapponese

Traduzione in corso passo 1

Passo 1
Locate the 2 Phillips screws (labeled PH 0) and remove screws using a screwdriver with a PH0 bit. Locate the 2 Phillips screws (labeled PH 0) and remove screws using a screwdriver with a PH0 bit. Locate the 2 Phillips screws (labeled PH 0) and remove screws using a screwdriver with a PH0 bit.
  • Locate the 2 Phillips screws (labeled PH 0) and remove screws using a screwdriver with a PH0 bit.

2本のプラスネジ(PH 0とラベル表記あり)の位置を確認して、PH0ビットドライバーで 外します。

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.