Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 2

Passo 2
Use the Philips head #0 screwdriver to remove the two 11.77mm screws holding the white clamp to the iron. Use the Philips head #0 screwdriver to remove the two 6.58mm screws holding the black wires to the body of the iron.
  • Use the Philips head #0 screwdriver to remove the two 11.77mm screws holding the white clamp to the iron.

  • Use the Philips head #0 screwdriver to remove the two 6.58mm screws holding the black wires to the body of the iron.

  • Removing the left black wire will also free the red wire, attached by the same screw.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.