Salta al contenuto principale
Inglese
Italiano

Traduzione in corso passo 8

Passo 8
Open the clip that holds the ribbon cable into the connector, by flipping it away from the cable side. Unsolder the ground cable from the logic board. Using desoldering braid will ease this task. Both connections from the display are now removed.
  • Open the clip that holds the ribbon cable into the connector, by flipping it away from the cable side.

  • Unsolder the ground cable from the logic board. Using desoldering braid will ease this task.

  • Both connections from the display are now removed.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.