Skip to main content
Inglese
Italiano

Traduzione in corso passo 4

Step 4
Remove the two Allen screws from the bottom. Another view of the two Allen screws on the top part. With the four screws removed, gently lift the non-connector side of the hard drive. It will only need to come up by about 1/4 of an inch.
  • Remove the two Allen screws from the bottom.

  • Another view of the two Allen screws on the top part.

  • With the four screws removed, gently lift the non-connector side of the hard drive. It will only need to come up by about 1/4 of an inch.

  • DO NOT lift it to high on that side, it may bend the pins on the connector.

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

Inserisci qui la traduzione

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.