Microsoft Surface Pro 5 Motherboard Replacement

Inglese

Italiano

Traduzione in corso passo 3

Passo 3

Disconnect the digitizer cable

Insert one point of a pair of pointed tweezers into a gap in the edge of the EMI shield covering the digitizer connector.
Use the tweezers to pry the EMI shield away from the display as much as you can without bending it.
Repeat this procedure at different points around the shield until it is free. Remove the shield.
Try not to deform the shield too much—you will need to reinstall it during reassembly.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.