Microsoft Surface Pro 5 Motherboard Replacement

Inglese

Italiano

Traduzione in corso passo 1

Passo 1

Disconnect the display interconnect cable

Insert one point of a pair of pointed tweezers into a gap in the corner of the EMI shield covering the display interconnect connector.
Use the tweezers to pry the EMI shield away from the motherboard as much as you can without bending it.
Repeat this procedure at different points around the shield until it is free. Remove the shield.
Try not to deform the shield too much—you will need to reinstall it during reassembly.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.