Nota: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto su tutte le 2guide che includono questo passo.
Traduzione in corso passo 1
Passo 1


Camera Modules
-
To more easily access this ribbon cable, flip the device so the back casing faces upwards. Gently slide the back casing forward, revealing the ribbon cable connecting to the motherboard.
-
Using a spudger, pry up the ZIF connector holding the ribbon cable.
-
Pull the ribbon towards the bottom casing and out of the connector.
I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.