Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Avviso: Stai modificando un prerequisito per la guida che stavi visualizzando. Tutte le modifiche avranno effetto sulla guida che include questo passo.

Inglese
Italiano

Traduzione in corso passo 6

Passo 6
Remove the battery from the iPhone.
  • Remove the battery from the iPhone.

  • If your replacement battery came in a plastic sleeve, slide off and remove the sleeve before installation.

  • If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.

  • Before you adhere the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.

  • Adhere the battery, disconnect it, and continue reassembling your device.

  • If your new battery doesn’t have adhesive preinstalled, refer to this guide to replace the adhesive strips.

  • Perform a force restart after reassembly. This can prevent several issues and simplify troubleshooting.

Rimuovi la batteria dall'iPhone.

Se la tua batteria sostitutiva è fornita in un astuccio di plastica, rimuovilo prima dell'installazione tirandolo dalla parte opposta del cavo a nastro.

Quando installi la batteria, fai riferimento a questa guida per sostituire le strisce adesive della batteria.

Effettua un riavvio forzato dopo il rimontaggio. Questa operazione può evitare diversi inconvenienti e semplificare la risoluzione dei problemi.

[* black] Remove the battery from the iPhone.
[* icon_reminder] If your replacement battery came in a plastic sleeve, slide off and remove the sleeve before installation.
[* black] Whenicon_reminder] If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.
[* icon_reminder] Before you adhere
the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.
[* black] Adhere the battery, disconnect it, and continue reassembling your device.
[* black] If your new battery doesn’t have adhesive preinstalled,
refer to [guide|103936|this guide|new_window=true] to replace your battery'sthe adhesive strips.
[* black] Whenicon_reminder] If there's any alcohol solution remaining in the phone, carefully wipe it off or allow it to air dry before installing your new battery.
[* icon_reminder] Before you adhere
the replacement battery, temporarily reconnect the battery connector to the logic board socket. This ensures that the battery is properly aligned in its recess.
[* black] Adhere the battery, disconnect it, and continue reassembling your device.
[* black] If your new battery doesn’t have adhesive preinstalled,
refer to [guide|103936|this guide|new_window=true] to replace your battery'sthe adhesive strips.
[* black] Perform a [guide|97575|force restart|new_window=true] after reassembly. This can prevent several issues and simplify troubleshooting.

I tuoi contributi sono usati su licenza in base alla licenza open source Creative Commons.